Stagnant Water: How To Get Rid Of It?

Water that remains stagnant for long periods of time is water that has remained in one place for many hours, days, or even weeks. It is most common after a flood but can also happen when the water doesn’t drain properly. It is also known as standing water. This water can soak into your home, causing water damage. It can also cause structural problems and health issues. Below you’ll see how to remove stagnant water, and keep your family safe during cleanup. It is also discussed the dangers and health risks of stagnant water.

How to get rid of stagnant water

Sometimes, stagnant water can be removed by you on your own. It will take much longer to dry your area with household equipment, such as fans and shop vacuums. Mold and bacteria can spread easily to carpet padding, drywall, and other materials.

It is recommend renting equipment for water removal and structural drying if you don’t have the time or ability to remove stagnant water. A water cleanup company is a good choice if you don’t have enough time or the equipment to quickly remove standing water. They can quickly remove standing water to minimize damage and protect your family.

It takes approximately 3 days

Estimated cost: $ 800

Supplies Required

Towels and rags

Bucket

Mop

Soap

Bleach

You will need tools

Pump

Wet-Dry Vacuum

Fan(s) with high-Volume

Structural Drying Dehumidifier

Steps to Remove Stagnant Water

1. Get rid of standing water

You must first remove as much water from the system as possible. A pump is recommended if there are more than a few inches. You can also use a vacuum cleaner or a bucket. To soak up the water, you can use blankets or towels if it is not very deep.

2. Remove Damage Material

Water can damage carpeting, drywall, and woodwork. It is best to throw away any damaged material. You should only remove the damaged section of wall when you are dealing with damaged walls. You can also move personal and furniture out of the room during this time. This will allow for faster drying and air circulation.

3. Dry Your Home

To dry your home quickly, you can use dehumidifiers and high-volume fans. This will help prevent mold growth and minimize structural damage. Regular household fans can be used, but they take longer. Most equipment rental companies will rent the tools you need.

4. Repair the Source of the Damage

To edit this text, click the Edit button. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

5. Clean and Disinfect the Area

Even if your home has been dried out, mold and bacteria can still grow on surfaces. You should clean any surface that has been wet with warm water and soap. Mix one cup bleach with a gallon water, then wipe it down to disinfect.

6. Rebuild and Restore

Finally, repair the area. The extent of the damage will determine what you should do. This includes replacing or cleaning old carpets, repainting, installing new cabinets, and replacing damaged drywall.

What are the dangers of stagnant water?

Standing water can pose a variety of hazards, regardless of where it comes from. Even clean water can eventually become a breeding ground of bacteria and mold. These are some of the main dangers associated with stagnant water. These risks are why you shouldn’t drink or cook with stagnant waters.

  • Bacteria.Cleaning standing water and flooding waters will allow bacteria to grow. E. coli, Salmonella and other bacteria are most prevalent in stagnant water. However, any type of bacteria can be found.
  • Mold – The longer your floors and walls are wetter, the more likely you have mold. It will take several days to mold clean water. However, it can take as little as 24 hours if there is sewage.
  • Viruses-Stagnant Water will allow viruses to breed, including the Norwalk virus (and rotaviruses). Other viruses may also be carried by insects and mosquitoes. You can read more about this below.
  • Parasites The most common parasites found in standing water are Entamoeba and Giardia. They can be found in clean water, but they are more prevalent after a flood or sewage backup.
  • Structural damage –Stagnant Water can cause structural damage to your home’s structure as it soaks in. Water can cause damage to walls, carpeting and carpet padding, as well as cabinets. Water can also warp hardwood floors or wood studs.
  • Rodents and Insects –Stagnant Water can attract rodents and insects. Zika fever, West Nile virus, and malaria can be transmitted to mosquitoes. Viruses and bacteria can also be transmitted to rats, mice, and other small rodents.

Standing water can sometimes smell bad, although it is not always a danger. In most cases, standing water smells like rotten eggs. This is due to the production of hydrogen sulfuride from bacteria that breaks down animal or plant matter. The smell will be worse if stagnant water has sewage.

Health Risks and Diseases

  • Cryptosporidium
  • Dengue Fever
  • Entamoeba
  • Fungus
  • Giardia
  • Legionnaires’ Disease
  • Malaria
  • Mold
  • Norwalk Virus
  • Rotavirus
  • West Nile Virus
  • Zika Fever

Structural Dangers

  • Ceiling Leaks
  • Carpet and Padding that is deteriorating
  • Wall and Wood Damage
  • Mold Growth
  • Swelling cabinets
  • Hardwoods that have been warped

What is the cost to clean stagnant water?

It’s difficult to determine the cost of cleaning up stagnant waters without seeing the damage. However, it is possible to expect to pay $600 to $1600. The cost of cleaning up depends on many factors, such as the amount and source of the water, the area and the time taken to complete reconstruction.

Leave a Reply

Your email address will not be published. Required fields are marked *